Auckland Cams Camshaft List

Camshaft	Master #	Type	Stage	Duration @ .050"	Advertised Duration	Cam Lift	Rocker Ratio	Valve Lift	Lobe Sep	Reprofile Price	Comments
TOYOTA 4AGE 16V	337	MECH	TURBO 1	222/222	272/272	351/351	N/A	351/351	112.5	NZ$240.00 plus gst	Good idle. Mild Road Turbo.
TOYOTA 4AGE 16V	101	MECH	TURBO 2	229/229	272/272	348/348	N/A	348/348	112.5	NZ$240.00 plus gst	Moderate idle. Fast road Turbo. Popular Turbo cam for road use.
TOYOTA 4AGE 16V	614 /615	MECH	STAGE 1	226/218	283/277	328/328	N/A	328/328	110	NZ$240.00 plus gst	Good idle. Mild road cam. Great midrange performance and torque.
TOYOTA 4AGE 16V	152 /107	MECH	STAGE 2	238/332	286/287	342/334	N/A	342/334	108	NZ$240.00 plus gst	Moderate to lopey idle. Fast Road Stage 2
TOYOTA 4AGE 16V	32 /152	MECH	STAGE 3	244/238	289/286	353/342	N/A	353/342	108	NZ$240.00 plus gst	Lopey idle. Very fast Road Stage 3.
TOYOTA 4AGE 16V	602 /603	MECH	STAGE 4	248/242	288/287	362/354	N/A	362/354	106	NZ$240.00 plus gst	Lopey to rough idle. Competition use Rally or Race Stage 4
TOYOTA 4AGE 16V		SEMI								NZ$700.00 plus gst	Billet cams (pair) unground

TOYOTA 4AGE 16V
This is just a small selection of popular cam profiles for this engine. Auckland Camshafts Limited carries a much wider range of profiles that suit this application. Please contact Auckland Cams if you require a different profile. Please note: the profiles listed here are suitable for the original shim-over-bucket set up. Due to the relatively small base circle Auckland cams recommend to grind all performance profiles on billet cams and retain the original base circle measurements. For full race cams Auckland Cams again recommend to use new billets but change set up to shim-under-buckets. This allows much more aggressive profiles with more lift. A full range of cam profiles are available on request.

TOYOTA 4AGE 16V

This is just a small selection of popular cam profiles for this engine. Auckland Camshafts Limited carries a much wider range of profiles that suit this application.

Please contact Auckland Cams if you require a different profile.

Please note: the profiles listed here are suitable for the original shim-over-bucket set up. Due to the relatively small base circle Auckland cams recommend to grind all performance profiles on billet cams and retain the original base circle measurements. For full race cams Auckland Cams again recommend to use new billets but change set up to shim-under-buckets. This allows much more aggressive profiles with more lift. A full range of cam profiles are available on request.